LTP Mouldex Grout Cleaner 500ml
LTP Mouldex Grout Cleaner 500ml removes mould stains from grout, silicone seals and damp areas. It clings to surfaces, helps prevent re-growth and restores white grout with powerful bleaching action.
LTP Mouldex Grout Cleaner 500ml is an intensive mould and grout cleaner designed to remove stains caused by mould spores, fungus, algae and moss from grout joints, silicone seals and other damp areas.
Formulated to cling to surfaces, LTP Mouldex gives the product time to work on affected areas, helping to lift stubborn staining and restore white grout closer to its original colour. It is ideal for bathrooms, kitchens, shower areas and other spaces where moisture can lead to mould growth.
The bleaching action helps improve the appearance of stained grout, while its antibacterial properties help reduce the chance of re-growth. It can also be used on natural stone and coloured grouting, but an inconspicuous test area should always be carried out first.
Key Features
- Intensive grout cleaner
- Removes mould stains caused by mould spores, fungus, algae and moss
- Suitable for grout joints and silicone seals
- Clings to surfaces for better contact time
- Helps prevent re-growth
- Bleaching action helps restore white grout
- Ideal for bathrooms, kitchens and shower areas
- Suitable for inside and outside use
- Can be used on natural stone and coloured grout, subject to testing
- 500ml trigger spray bottle
Product Specifications
| Specification | Details |
|---|---|
| Product Name | LTP Mouldex Grout Cleaner |
| Product Code | LTP/25 |
| Product Type | Mould & Grout Cleaner |
| Size | 500ml |
| Application | Grout, silicone seals and damp areas |
| Use Areas | Bathrooms, kitchens, showers and damp spaces |
| Suitable For | Internal and external use |
| Coverage | Approx. 5–15m² depending on tile size and application |
| Finish / Action | Bleaching action |
| Storage | Keep upright in a cool, dry place |
| Shelf Life | Use within 6 months after opening for best results |
Suitable Uses
- Bathroom grout cleaning
- Shower grout cleaning
- Kitchen grout cleaning
- Silicone seal cleaning
- Mould staining around tiles
- Damp areas affected by mould, fungus, algae or moss
- White grout restoration
- Natural stone and coloured grout, after testing first
Directions for Use
Shake well before use. Surfaces to be treated should be completely dry before application. Always test on an inconspicuous area before general use.
Hold the bottle upright and spray from approximately 5–10cm away from the surface. Leave for around 45 minutes, then apply a little water and agitate with a stiff brush to release dirt and grime. Rinse thoroughly using a sponge and water.
For stubborn stains and most silicones or elastic grouting, a longer treatment may be required. Apply again and leave on the surface overnight where suitable, then rinse thoroughly.
Important Usage Notes
Do not use with acid-based residual grout removers or acid-based cleaners. Avoid contact with metals, fabrics and painted surfaces. If contact occurs, rinse immediately with water.
Always test first on natural stone, coloured grout and sensitive surfaces before full application.
Health & Safety Note
This product contains bleaching agents and should be used with care. Wear protective gloves and eye protection during use. Keep out of reach of children. Avoid inhaling spray mist and ensure good ventilation when applying indoors.
