Palace Colour-Lock Rapid Setting Wall & Floor Tile Grout
Palace Colour-Lock is a fast-setting, polymer-fortified wall and floor tile grout with stable colour, mould resistance and excellent water repellency. Suitable for internal and external joints up to 20mm. Available in 12 colours.
Palace Colour-Lock Grout is a fast-setting, polymer-fortified and mould-resistant grout formulated using lime-free binder technology. This specialist formulation helps achieve a consistent finished colour without being affected by efflorescence or unwanted shade variation.
Available in a choice of 12 grout colours, Colour-Lock is suitable for wall and floor tile joints up to 20mm wide. Its smooth, readily compactable consistency makes the grout easy to mix and apply across ceramic tiled surfaces using a sponge or rubber squeegee.
Once set, Colour-Lock creates a hard, durable, shrink-resistant, mould-resistant and water-repellent finish. It is suitable for both internal and external locations, including sanitary areas where resistance to fungal and black spot mould growth is particularly important.
Palace Colour-Lock can be used in kitchens, bathrooms, showers and toilets. It is also recommended for more challenging tiled areas, including installations over plywood and heated sub-floors where minor movement or vibration may occur.
Choose your required grout colour using the selection menu above. The product reference and stock availability will update according to the colour selected.
Available Grout Colours
- Midnight
- Raven
- Platinum
- Sterling Silver
- Natural Grey
- Silver Shadow
- Mocha
- Latte
- Parchment
- Antique White
- Silk
- Bright White
Colour Notice
Grout swatches are provided as a visual guide. The final dried colour may vary slightly depending on mixing, application, lighting, tile type and site conditions. Always follow the manufacturer’s preparation and application instructions.
Key Features
- Fast-setting wall and floor tile grout
- Sets within one hour
- Polymer-fortified formulation
- Lime-free binder technology
- Efflorescence-free stable colour
- Hard and durable finished surface
- High early strength
- Excellent water repellency
- Abrasion resistant
- Shrink resistant
- Mould resistant
- Resists black spot mould growth
- Smooth, easy-to-apply texture
- Suitable for joints up to 20mm
- Suitable for internal and external use
- Suitable for underfloor heating
- Suitable for swimming pools
- Available in 12 colours
- Conforms to BS EN 13888 CG2 WA
| Specification | Verified information |
|---|---|
| Brand | Palace |
| Product range | Colour-Lock |
| Product type | Wall and floor tile grout |
| Formulation | Polymer fortified |
| Binder technology | Lime-free |
| Setting type | Rapid setting |
| Setting information | Sets within one hour |
| Maximum joint width | Up to 20mm |
| Application | Wall and floor tile joints |
| Suitable tile surfaces | Ceramic tiled surfaces |
| Location | Internal and external |
| Water resistance | Water repellent |
| Mould resistance | Yes |
| Shrink resistance | Yes |
| Efflorescence resistance | Yes |
| Underfloor heating | Suitable |
| Swimming pools | Suitable |
| Standard | BS EN 13888 |
| Classification | CG2 WA |
| Available colours | 12 |
Do not enter the bag weight, coverage, mixing water quantity or application temperature until you have verified them from the physical bag or technical data sheet.
Best Uses
- Bathroom wall and floor joints
- Shower areas
- Kitchen tiles
- Toilet and washroom areas
- Internal tiled floors
- External tiled areas
- Underfloor heating installations
- Swimming pool tiling
- Ceramic wall tiles
- Ceramic floor tiles
- Areas requiring mould resistance
- Joints up to 20mm wide
